Easy Installation Horizontal Wind Turbine 1000Watt High Efficiency Wind Power Generator
1. Brief introduction of HY Energy wind turbine:
HYE wind turbine is featured on higher power output at lower wind and excellent braking performance at heavy wind to prove its flexibility and reliability. We produce 400w, 600w, 1kw, 1.5kw and 3kw wind turbine with certified by CE, ETL, RoHs. There are 150 workers and 10 people R&D team. Each component of HYE wind turbine is in dependently designed. Our wind turbine has been selected into WWEA high quality product catalogue for 8 years and owns over 35 national patents, products have been shipped to more than 108 countries, such as France, Germany, Sweden, Poland, South Africa ,India etc., thanks to the subsidy policy, we have sold more than 6 thousands of wind turbines and controller inverters to France in 2012 and won a very good reputation, already hold 60% market share there.
2. Tower Installation:
An ideal location for wind generator is required with stable speed and direction of prevailing wind. Small changes in wind speed and direction can have a dramatic effect on power production. In general, the higher the tower, the greater the wind speed and ultimately power production are. Therefore, the site of your wind turbine should be carefully considered. Each installation is different and is often compromised among the tower height, distance from the battery bank, local zoning requirements and obstacles such as buildings and trees. Following requirements should be followed:
- The minimum recommended tower height is 20 ft (6 m) on open ground or 20 ft (6 m) above nearby obstructions；
- Try to locate the wind turbine in the “cleanest” turbulent free air as possible. Turbulence will reduce the efficiency of wind turbine and may accelerate wear on rotating components.
- Try to locate the turbine without obstacles within 200m of installation center.
- The installation distance between two turbines should be 8-10 times of the rotor diameter.
- Installation site should be complied with local regulations.
3. Specifications of HY-1000 wind turbine:
| Model |
HY-1000 |
| Rated Output |
1000W |
| Peak Output |
1200W |
| Rated Voltage(V) |
Grid-off DC24/48 or grid-tie DC48/110 |
| Start-up Speed |
2 m/s or 4.5mph |
| Cut-in Speed |
2.5m/s or 5.6mph |
| Rated Wind speed |
12m/s or 26.8mph |
| System average Cp. |
>0.36 |
| Rate Charging Current (A) |
DC41.7/20.8 |
| Noise level |
<30dB (@50 feet distance from hub center) |
| KWH/month (monthly avg. V 5.5m) |
Approx. 175 |
| Working Temp. range |
from -40°C to 60°C |
| Survival Max. wind |
50m/s or 110mph |
| Overspeed control |
Electromagnetic brake & blade aerodynamic speed control |
| Number of Blades |
5 |
| Rotor Diameter(m) |
196 |
| Swept Area (m2) |
3 |
| Blade Material |
Strengthened nylon glass-fiber |
| Generator Type |
Brushless 3-phase PMA with high performance Neodymium Magnets |
| Tower-top Weight |
28kg |
| Tower Type |
self-supporting, guyed, Tilt-up tower or rooftop mounting etc. |
| Controller Type |
MPPT or PWM |
| Applications |
solar & wind hybrid lighting, on/off-grid power system etc. |
| Product Life (years) |
15 |
| Warranty (years) |
3 years (optional 5 years) |
| Years on Market |
5 |
| Unit Sold Worldwide |
>12,000 sets |
| Certificate |
Certified by ISO9001:2000, CE, RoHS, ETL |
| Optional Accessories |
lightning rod & shock absorber |
