| Product Model |
HY-T1-WSII-04-NNHN-1
|
|
Applied battery voltage
|
12V
|
|
Battery protect method
|
Reverse connection protection (do not burn any components, with voice prompt); over voltage protection, under voltage protection (for street light and such kind of load)
|
|
Voltage at the over voltage protection point
|
14.5V±0.2V
|
|
Voltage at the over voltage recovery point
|
13.7V±0.2V
|
|
Voltage at the under voltage protection point
|
10.5V±0.2V
|
|
Voltage at the under voltage recovery point
|
11.5V±0.2V
|
|
Battery temperature compensation
|
5mv/℃/2V (settable) (optional component)
|
|
Rated power of applied Wind turbines
|
400W/12V
|
|
Rated power of the terminal
|
25A
|
|
Max. input current of the terminal
|
35A
|
|
The default speed of the Wind turbines generation with limited speed
|
500 Rpm (settable)
|
|
The default current of the Wind turbines generation with limited current
|
25A (settable)
|
|
Wind turbines protection method
|
over rev protection, over current protection, induction lightening protection
|
|
Unloading method
|
PWM stepless high-frequency soft unloading (built-in)
|
|
MPPT function
|
Boost MPPT model ( automatic tracking or 5 segments curve tracking)
|
|
Input current of MPPT channel
|
12A
|
|
Rated input current of terminal
|
15A(standard)
30A(optional)
|
|
Charging voltage drop
|
<0.2V
|
|
PV protection methods
|
Reverse connection protection (voice prompt)
|
|
Unloading method
|
Open circuit unloading
|
|
output
|
2 outputs
|
|
Current of each output
|
12A
|
|
Output protection methods
|
Over current protection (15A/30sec. 18A/0.4sec.), short-circuit protection (current > 150A)
|
|
Output control methods
|
light control, time control, reverse output, PWM output (250HZ, only the 2nd output has it)
|
|
Auxiliary function
|
Monitor of air temperature inside controller, temperature of unloading parts and Wind turbines MPPT components, and also the monitor of control terminals installed on the inversion (with voice prompt)
|
|
Display mode
|
Liquid crystal (LCD) display
|
|
Communication mode
|
RS232(5V electrical level)/RS485 (standard)
Short-range wireless (optional)
|
|
Displayed parameters
|
Wind turbines input voltage/current/power/generated energy/rev/unloading current
PV input voltage/current/power/generated energy
Battery voltage/charging current/power/total charging capacity/battery status information
output current/power/abnormal information of the 2nd output port
|
|
Power consumption in standby mode(screen backlight closed)
|
About 20ma /24V system
|
|
Operating mode
|
3M foil key operation (4 keys)
|
| Working temperature / humidity range (environment) |
-40~+80℃/20~85%RH(non condensing)
|
|
Protection grade
|
IP41
|
|
Controller size (L*W*H)
|
175mm*148mm *84mm
|
|
Net weight
|
1.8KG
|
